Válvula macho de duas vias, com tampa ISO e vedação suplementar tipo CA

DIN-EN: DN 15 – 600 / PN 10 – 40 ASME: NPS ½“ – 24“ / class 150 – 300 PT range: -30 < T < 230°C, vaccum 10-8 mbar

Design Features

Características construtivas

  • Sem espaço morto
  • Livre de manutenção – autolubrificada
  • Tampa conforme DIN ISO 5211 – facilita a montagem de atuadores
  • Fácil acesso para o reajuste do macho, inclusive para válvulas automáticas
  • Recomendada para aplicação em vácuo
  • Certificação TA-Luft 2002 (Dekra) – baixa emissões fugitivas
  • Certificação SIL 3 capable (Exida)
  • Certificação FDA

PT-Diagram

PT-Diagramm-2015-GB Operating temperatures < -30°C and > 220 °C have to be checked and approved by AZ according to the operating conditions. Besides the P/T value of the sleeve the limitations of the valve bodies also have to be considered. Please refer to the EN 12516-1 resp. ASME B16.34 in order to choose a proper pressure rating (PN/class). The shown values refer to austenitic stainless steel 1.4408 (A351 Gr. CF8M). 1) For operating temperatures below -10°C low temperature / austenitic steels are required. 2) Sleeve: There are different sleeve materials / compounds available.

Materials

Standard body materials • Carbon Steel 1.0619, ASTM A216 WCB • Stainless Steel 1.4408, ASTM A351 CF8M • Stainless Steel 1.4308, ASTM A351 CF8 • Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352 Standard plug materials • Stainless Steel 1.4408, ASTM A351 CF8M • Stainless Steel 1.4308, ASTM A351 CF8 Special materials • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395 • Alloy • Monel • Nickel • Zirconium • Titan • Tantal • other materials on request

Sealing Systems

[table id=23 /]

Port Forms

Kuekenform-F2-D_T4

Dimensions

Techn-Daten-GB-F2-STD-1 Techn-Daten-GB-F2-STD-2 For geometric reasons, threads are used in the flange bores in a few cases

Actuation

actuation-valves-met 1 Locking Devices Pilot valve combinations, pad lock eyelets, linear key conception, indexing plunger arrestor. read more […] 2 Plug stem extension Solid construction in stainless steel with T-wrench, Standard extension 100 mm or 150 mm, non standard lengths are available on request read more […] 3 Actuators Actuators for mounting-flange acc. to DIN ISO 5211 read more […] NEW: Pneumatic actuator AIR GEAR for plug valves with high torque ≥150.000 Nm read more […] 4 Ratched coupling To usw on multiport valves with standard 90° actuator for bigger switchpositions than 90° read more […] 5 Cover extension Solid construction in stainless steel, Standard extension 100 mm or 150 mm high,  non standard lengths are available on request . Hexagonal bolts on adjustment ring freely accessible. Note: Don’t use with sealing FSN/FSN-SL and CASN/CASN-SL read more […]