Válvula esfera revestida para fundo de tanque/reator – alta resisitência a processos corrosivos

DIN-EN: DN 15 – 100 / PN 10 – 25 ASME: NPS ½“ – 8“ / class 150 Einsatzbereich: -30 < T < 230°C

Especificações
Certificado
Orçamento

Design Features

Características construtivas

  • Passagem plena
  • Corpo bipartido
  • Padrão curto
  • Esfera e haste monobloco
  • Haste a prova de expulsão
  • Com reajuste da vedação (gaxetas)
  • Espaço morto minimizado
  • Livre de manutenção – autolubrificada
  • Alta resistência a processos corrosivos – revestimento minimo de 3mm – indicada para vácuo
  • Livre de emissões fugitivas – certificação TA – Luft 2002
  • Certificação FDA

PT-Diagram

PT-Diagramm-2015-3-kugel The specified values depend on the respective application (medium). Operating temperatures under -20°C only with body material 1.4408 or low-temperature steel. Hight pressure resistance / temperature resistance on request, e.g. PN 40. Sleeve: There are different sleeve materials / compounds available.

Materials

Standard body materials • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395 Standard plug materials • Stainless Steel 1.4308, ASTM A351 CF8 Special materials • Carbon Steel 1.0619, ASTM A216 WCB • Stainless Steel 1.4408, ASTM A351 CF8M • Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352 Lining materials • Body: PFA, PFA-conductive, FEP, PVDF • Ball: PTFE, PFA, PFA-conductive, FEP, PVDF • Seal Ring: PTFE

Sealing Systems

[table id=32 /]

Port Forms

Kuekenform-D

Dimensions

Techn-Daten_GB_Neoval For geometric reasons, threads are used in the flange bores in a few cases

Betätigung

Hand-Auto_DE-Kugelhahn 1 Verriegelung Zündflammkombination, Ösen für Vorhängeschloss, lineares Schlüssel-Prinzip, Rastbolzen-Arretierung für Handhebel oder Handgetriebe, mehr erfahren […] 2 Kükenschaftverlängerung Robuste Konstruktion aus Edelstahl in den Standardhöhen 100 und 150 mm (weitere auf Anfrage) mit T-Hebel mehr erfahren […] 3 Stellantriebe Unterschiedliche Stellantriebe zum Aufbau auf die Konsole gemäß DIN-ISO 5211 inklusiv Magnetventil, Endlagenrückmeldungen, Stellungsregler usw. mehr erfahren […] NEU: Der pneumatische Antrieb AIR GEAR für Armaturen mit hohen Drehmomenten ≥150.000 Nm mehr erfahren […] 4 Schrittschaltkupplung Bei Mehrweghähnen können mit einem 90°-Standard-Schwenkantrieb Schaltwege bis 360° gefahren werden mehr erfahren […] 5 Flanschverlängerung Durch Montage der Flanschverlängerung aus Edelstahl keine Behinderung der Kükennachstellung, Standardhöhe 100 mm. Hinweis: Montage bei Schaftabdichtungen FSN/FSN-SL und CASN/CASN-SL nicht möglich mehr erfahren […]